Low torque
The shaft axis is designed to run through the center of gravity, reducing the head's built-in tendency to open or close.
CG↔AXIS <0.001 mm — CADSeries 01 technology
SCROLL TO STRIP IT DOWN
00 — ADDRESS
Still at address.
Still at impact.
Still at impact.
Three milled sight lines. Depth does the aiming.
01 — ARCHITECTURE
Stillness, machined.
6061 aluminum.
6061 aluminum.
360.0 g. Every gram placed on purpose.
02 — MASS BIAS
Balanced at the edges.
20 g toe · 15 g heel · MOI
6,077 g·cm²
03 — REASSEMBLY
It goes back as one.
And stays that way.
And stays that way.
5 × M2.5 torqued to spec. Sole plate seated.
04 — LOW TORQUE
Low torque. Geometry designed for stability.
360.0 g · MOI 6,077 g·cm² · 112 × 82 × 21 mm
View Series 01 — €399 target Why it exists
Less compensation.
More attention on the stroke.
A clear line, a head designed to stay stable, and honest feedback at impact. Three design choices, each to be verified on physical prototypes.
Three engineering principles
High MOI
The hollow 6061 aluminum construction moves useful mass toward the perimeter with asymmetric 20 g and 15 g edge weights.
6,077 g·cm² — CADHonest feedback
A milled face with no insert. What you feel — and hear — at impact is the strike itself, never a damped approximation of it.
MILLED 6061 ALUMINUM — NO INSERT SERIES 01 — LIMITED FIRST RUN
Be still when it counts.
One head in Black or Mineral. Two lengths. Our own STILL pistol grip. Current performance figures are CAD targets pending prototype validation.